You Asked for the Best Aluminum Hauling Winch, and InMac-Kolstrand Listened!
InMac-Kolstrand's AKPW12D10W-AL-DR610 Aluminum Winch manufactured by InMac-Kolstrand surpasses all others, and is recognized in the industry for its outstanding performance and durability.
The Winch Housing and Drum are manufactured out of Marine Grade Aluminum for many years of Salt-water service. And the Support Bars and all Fastenings are manufactured in Marine Grade Stainless Steel. The White Hydraulics DR Hydraulic/Brake Drive is used exclusively for optimum performance.
The Winch Main Hydraulic Motor Drive, combined with an automatic brake, allows smooth control for raising and lowering your load. The robust motor design allows the InMac-Kolstrand AKPW12D10W-AL-DR610 Winch to be used in most hydraulic systems... The use of a Case Drain Line is necessary for smooth brake operation.
InMac-Kolstrand Model AKPW12D10W-AL-DR610 Aluminum Winch Assembly comes complete with Aluminum Winch Frame and Drum, and with Automatic-set Brake Arrangement. Winch is equipped with DR610 Hydraulic Motor and Brake Assembly for positive lifting and holding capability.
Drum measures 12” Diameter Flange X 10” Between the Flanges with 6 5/8” Diameter Barrel.
Weight: Approximately 145 Lbs
Wire Cable Storage Capacity: 250 Feet 3/8” Diameter Wire Cable, or 175 Feet of 7/16" Diameter Wire Cable, with 1” of Bare Drum Flange Still Showing Following Wire Spooling.
Winch Performance: Based upon 12 GPM @ 2000 PSI
Bare Drum Line Pull: 2,230 Lbs Bare Drum Line Speed: 150 Feet per Minute
Mean Drum Line Pull: 1,587 Lbs Mean Drum Line Speed: 220 Feet per Minute
Full Drum Line Pull: 1,230 Lbs Full Drum Line Speed: 282 Feet per Minute
InMac-Kolstrand Aluminum Cargo Winch - 2,000 Lb Bare Drum Hoist Capacity
InMac-Kolstrand's Aluminum-Cargo Winch with Aluminum Winch Frame and Drum, equipped with White Hydraulics DR Series Motor/Brake Arrangement Model AKPW12D10W-AL-DR610SS Winch Weighs Approximately 140 Lbs.
A simple schematic of a system utilizing a motor/brake is shown above. If you have any questions concerning the installation of the InMac-Kolstrand AKPW12D10W-AL Winch into your Hydraulic System, please contact us! We'll be glad to assist you! Although maximum brake release pressure may be used for the Brake Release application, a 34 bar [500 psi] Pressure Reducing Valve is Pre-plumbed onto the Winch Motor to promote maximum life for the brake release piston seals. In the event of a pump or battery failure, an external pressure source may be connected to the brake release port to release the brake, allowing the winch to lower a load.
PLEASE NOTE: InMac-Kolstrand winches are neither designed nor intended for installation on equipment used in lifting or moving of personnel. InMac-Kolstrand cannot be held responsible for accidents occurring from such use.
CONTINENTAL US SHIPMENT COSTS: As this InMac-Kolstrand Item/Product weighs more than 150 Lbs, it must be shipped Via Truck/Surface Freight to you. As Truck/Freight Charges change daily due to the Cost of Fuel, Insurance, Residential Delivery Charges, Liftgate Charges, etc., the following Freight Charges are Only for Budgetary Purposes, to be used only as guide for you to Estimate your total Delivered Shipping Costs. Actual Charges will be E-mailed to you 1 to 2 Days following your Placed Order, for you to approve of the charges prior to Shipment.
Again, the Freight Charges Below are only to be used as AN ESTIMATE FOR BUDGETARY PURPOSES! Your Actual Charges will most likely be LESS!
If we are to ship this item to the West Coast Region (WA, OR, CA, ID, UT, WY, MT, NV, CO, AZ, NM), we Estimate that it will Cost $324.00
If we are to ship this item to the Central Region (TX, LA, MS, OK, AR, KS, MO, NE, IA, IL, IN, OH, SD, ND, MN, WI, MI), we Estimate that it will Cost $368.00
If we are to ship this item to the East Coast Region (ME, NH, VT, MA, CT, PA, RI, WV, NJ, NY, VA, KY, TN, NC, SC, GA, AL, FL), we Estimate that it will Cost $390.00
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD.