Kolstrand's 10 In Integral LineHauler with Control Valve is the ideal Trap or Pot Hauler for the Yachtsman or Small Boat Class.
When used in conjunction with the Optional Kolstrand Honda 5 HP Self-Contained Hydraulic Power Unit (for Light-duty Hauling) or the Optional Kolstrand Honda 8 HP Self-Contained Hydraulic Power Unit (for Heavy-duty Hauling) , along with the Optional Hose Kit, this Compact LineHauler is easy to install and will pull your Trap or Crab/Shrimp Pots effortlessly.
LineHauler comes complete with Davit Rail Support and Foot Sockets to fit the 2" ID (2-3/8" OD) Davit Pipe, which need to be installed into the vessel adequately to handle not only the weight of the LineHauler, but the Total Intended Hauling Load. If in doubt, please consult with Kolstrand or your Naval Architect for additional guidance. The Folbe 3" Open-faced Nylon Block as shown is optional, to be ordered separetly!
Kolstrand's 10" Integral LineHauler with Control Valve Arrangement may be assembled for use on either the Starboard or Port side of the vessel. Select your preference at order entry below. Also, as the 10" Integral LineHauler is plumbed (hosed) between the provided Control Valve and the Hauler Hydraulic Motor, we need to know your 'Rail Height' (at the location where the hauler and davit will be installed) in order to make the hose assemblies long enough, to allow the hauler to pivot inboard as if when the vessel is docking. Please select your Rail Height Dimension below.
All Kolstrand Manufactured Products, LineHaulers, Anchor Winches, Power Blocks and PowerGrips are proudly made by workers right here in the in the U.S.A.
Kolstrand 10 Inch Integral Davit-style LineHauler with Davit and Control Valve