InMac-Kolstrand Manufactures Specialty Winches for a variety of applications.
The displayed InMac-Kolstrand AKPW16D14.3W-DLW-BRAKE-RE21 Special Aluminum Winch with Diamond Screw Level Wind was designed for a customer who needed to use 1/4" Diameter Electro-Mechanical Cable to have his 'Fish/Sensor' communicate with his electronic equipment on deck. Winch Sides and Drum are manufatured out of Marine Grade Stainless Steel.
The displayed AKP16D14.3W-DLW-BRAKE-RE21 Winch was manufactured with a larger 6-5/8" Diameter Drum Core with Access Plate and 'Slip-Ring' provision to allow this needed function. The Drum measures 16" Diameter Flanges X 14-3/8" Between the Flanges X 6-5/8" Diameter Core. The AKP16D14.3-ULW Winch is also available with a smaller diameter Drum Core (4-1/2") should you not need the Slip Ring provision. Winch Drum is Supported on both sides by large Bronze Support Bearings. Drum sized to Store 1,000 Feet of 1/4" Diameter Synthetic Line or cable.
The AKPW16D14.3W-DLW-BRAKE-RE21 Winch comes Standard and equipped with a precision machined Diamond Screw Level Wind for precise spooling of the cable onto the drum. The Load-holding Automatic-set Hydraulic Brake Assembly (stacked between the Hydraulic Motor and the Winch Frame) is sized to hold the strongest towing loads, and will automatically release, or set and hold your load, while the winch is being operated.
Winch is equipped with White Hydraulic RE350 (21.3Cube) Direct Coupled Hydraulic Motor, and the Drum will rotate under loaded conditions 125 RPM when 12 GPM @ 2000 PSI is delivered to Hydraulic Motor.
Winch Hydraulic Brake Assembly designed to hold 1,395 Lb Bare Drum Load without creeping of the drum for 10 Minutes.
Winch is equipped with Automatic Diamond Screw Level Wind. Winch is designed to be 'Bolt-down Style' with Mounting Holes provided in Winch Mounting Feet.
Call Kolstrand if you need a winch for your special application. Only the Best is made at InMac!
For Application Assistance, Expedited Delivery Times, Commercial Pricing, or any unanswered questions concerning this product, please call Kal Harris in the InMac-Kolstrand Seattle Commercial Office at 206-784-2500 or e-mail email@example.com
Winch Performance: Based on 12 GPM @ 2000 PSI
Drum Speed: 125 RPM
Bare Drum Line Pull: 1,560 Lbs - - Inhaul Bare Drum Line Speed: 215 Feet per Minute
Mid Drum Line Pull: 1,100 Lbs - - Inhaul Mid Drum Line Speed: 370 Feet per Minute
Full Drum Line Pull: 640 Lbs - - Inhaul Full Drum Line Speed: 520 Feet per Minute
Drum Capacity: 1,000 Feet 1/4" Diameter Synthetic Line or Cable
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD.