Loading... Please wait...

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8

Kolstrand 'SeaCatcher' 2N-S-AL6T Aluminum Purse Seine Winch with 7 Inch Gypsy Heads, E-Stop Emergency Kill Switch Arrangement, and Optional 17 In Pursing Sheaves

$22,682.00
SKU:
AKPSW-AL2N-S17SS-30ES Winch-AL
Availability:
6 to 8 Weeks After Order Date

 Product Description

SALMON FISHERMEN!  You asked for us to provide the most Affordable and Lighter Purse Winch for the 40 to 56 Foot Seiner, and InMac-Kolstrand Listened!  InMac-Kolstrand's Line-up of 'SeaCatcher' Purse Winches can't be beat!

Kolstrand's 'SeaCatcher' SW2N-S-AL Aluminum Purse Seine Winch  is available as a 'Bare-Bones' Gypsy Purse Winch with just the Cast Iron Gypsies, or add the OPTIONAL 'SeaCatcher Features' like the Stainless Steel Gypsies (in lieu of the Standard Cast Iron), 17" Diameter Stainless Steel V-Sheaves and Large 5" Diameter Stainless Steel Idler Rollers with Large Diameter Stainless Steel Idler Shafts equipped with Stainless Steel Bearings, Stainless Steel Horizontal Roller with Stainless Steel Bearings, and Stainless Steel Splitter.  We'll make the winch perform to your liking...  Guaranteed!

The SeaCatcher Line of Purse Winches include exclusive features not found in other Purse Winches.  You'll especially like the provided Grease Panel which makes lubricating the Idler Sheave Bearings, the Main Gypsy Shaft Bearings, and the Drive Chain and Sprockets a breeze without having to remove any inspection cover plates.

All SeaCatcher Purse Winches come Standard with the E-STOP Emergency Kill Switch Installed into the Winch Horn.  Also provided is the E-Stop Control Valving with Wiring Diagram for easy installation.

Winch Housing is of Sturdy and Re-inforced Aluminum Construction with Large Radius Edges.  Aluminum Winch Housing sheds 400 Lbs when compared to the Steel Galvanized version.  And the optional 6" extra-tall housing makes using the winch easier!

Powerful CharLynn 6,000 Series Hydraulic Motor is used exclusively for maximum performance.

Note: The InMac-Kolstrand SeaCatcher 2N-S-AL Purse Winch is available with the more expensive Stainless Steel Idler Sheaves (in lieu of Aluminum).  Click on the Option Below for Stainless Steel Idlers!

Note: The InMac-Kolstrand SeaCatcher Purse Winch is available 6" Taller for easier Line Warping as an Option.  If you want your new Purse Winch Housing a little taller, Select the Option Below for the '6T Taller' Version.

  • For Application Assistance, Expedited Delivery Times, Commercial Pricing, or any unanswered questions concerning this product, please call Kal Harris in the Kolstrand Seattle Commercial Office at 206-784-2500 or e-mail kal@kolstrand.com

cs-for-inmac-compass-2n-s-al6t-purse-winch-aluminum-housing-1.jpg 

cs-for-inmac-compass-2n-s-al6t-purse-winch-aluminum-housing-2.jpg

Kolstrand SeaCatcher 2N-S-AL6T Aluminum Purse Seine Winch

Winch weighs Approximately 670 Lbs 

Kolstrand 2N-S-AL6T Winch Performance: Based upon 28 GPM @ 1500 PSI

         With CharLynn 6000/30 Hydraulic Motor

          Gypsy Line Pull: 5,200 Lbs - Gypsies Turn 70 RPM Under Loaded Conditions = 120 FPM

          Sheave Line Pull: 3,000 Lbs = 230 FPM

---------------------------

CONTINENTAL US SHIPMENT COSTS: As this Kolstrand Item/Product weighs more than 150 Lbs, it must be shipped Via Truck/Surface Freight to you. As Truck/Freight Charges change daily due to the Cost of Fuel, Insurance, Residential Delivery Charges, Liftgate Charges, etc., the following Freight Charges are Only for Budgetary Purposes, to be used only as guide for you to Estimate your total Delivered Shipping Costs. Actual Charges will be E-mailed to you 1 to 2 Days following your Placed Order, for you to approve of the charges prior to Shipment.

Again, the Freight Charges Below are only to be used as AN ESTIMATE FOR BUDGETARY PURPOSES! Your Actual Charges will most likely be LESS!

If we are to ship this item to the West Coast Region (WA, OR, CA, ID, UT, WY, MT, NV, CO, AZ, NM), we Estimate that it will Cost $750.00

If we are to ship this item to the Central Region (TX, LA, MS, OK, AR, KS, MO, NE, IA, IL, IN, OH, SD, ND, MN, WI, MI), we Estimate that it will Cost $1,050.00

If we are to ship this item to the East Coast Region (ME, NH, VT, MA, CT, PA, RI, WV, NJ, NY, VA, KY, TN, NC, SC, GA, AL, FL), we Estimate that it will Cost $1,160.00

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write review

This product hasn't received any reviews yet. Be the first to review this product!

Categories

News

newsletter

Connect with us

FacebookInstagramYouTube

Click the button below to add the Kolstrand 'SeaCatcher' 2N-S-AL6T Aluminum Purse Seine Winch with 7 Inch Gypsy Heads, E-Stop Emergency Kill Switch Arrangement, and Optional 17 In Pursing Sheaves to your wish list.